We prepare the slab, we do not just roll over it
Almost every failed garage floor is a preparation failure. Coating over grease, dust or an old finish that was already letting go guarantees the new one lets go too. Profiling the concrete is the job.
Houston, TX
Concrete coating and staining is the cleaning, preparation and finishing of bare or previously coated concrete so it resists stains, moisture and wear instead of absorbing them. We coat, stain and seal garage floors, patios, driveways, porches, pool decks and walkways across Houston.
What it is
Concrete is porous. Left bare it takes in oil, rust, pool chemicals, fertiliser and water, and in Houston it also takes a great deal of sun. A coating or stain seals the surface so those things sit on top of it and wipe off, rather than soaking in and staining permanently.
Coating is opaque and covers the concrete, which is the usual choice for garage floors. Staining colours the concrete while letting its texture show, which suits patios, porches and pool decks. Sealing goes over either, or over bare concrete on its own.
How we do it
We look at the slab with you first and check what is actually there: bare concrete, an old coating that is peeling, existing stains, cracks, and whether moisture is coming up through the slab. That determines what will bond and what will not, and it is the difference between a floor that lasts and one that lifts in sheets.
Then: the surface is cleaned and degreased, existing coatings and contaminants are removed, and the concrete is profiled so the new finish has something to grip. Cracks and spalling get patched. Then the coating, stain or sealer goes on in coats, with the cure time it actually needs before anything is driven or dragged across it.
How we do it differently
Almost every failed garage floor is a preparation failure. Coating over grease, dust or an old finish that was already letting go guarantees the new one lets go too. Profiling the concrete is the job.
A slab pushing moisture up from underneath will lift a coating no matter how good the product is. Finding that out before we start is worth more to you than a cheaper number.
A floor that gets parked on too early is a floor that gets ruined. We tell you when it is genuinely ready, even when that is longer than you were hoping for.
Every project is completed by our own in-house team. We do not use subcontractors, so the person who quotes your project is accountable for the crew that shows up to do it.
What to expect
Included services
All of it quoted in writing, line by line, before we start.
Bare or previously coated garage slabs prepared and coated to resist oil, chemicals, hot tyres and abrasion.
Colour worked into the concrete so the texture still reads through. Suits patios, porches and pool decks.
Opaque coatings on interior or exterior slabs where you want full, even colour.
Patio slabs cleaned, repaired and finished to handle sun, rain and furniture.
Driveways coated or stained, prepared for vehicle traffic and tyre marking.
Front porches and steps finished to take foot traffic and weather at the entry.
Pool surrounds finished with wet-area use in mind, including the surface texture underfoot.
Paths and walkways coated or stained to match the rest of the exterior.
Sealer over bare or finished concrete and masonry to slow water absorption and staining.
Common questions
Yes. We provide a 2-year workmanship warranty on our painting projects. If something we did is not holding up the way it should, we come back and put it right.
Longer than it looks. A coating can feel dry to the touch well before it has cured enough to take vehicle weight and hot tyres, and parking early is the most common way a good floor gets ruined in its first week. We give you both times: when you can walk on it, and when you can park on it.
Not over it, no. A failing coating is not a surface anything new will bond to, so it has to come off first as part of the preparation. That is work, and it will show in the quote, but coating on top of something already letting go just buys you the same failure again.
It gives you a sealed surface that oil sits on rather than soaks into, which is the difference between wiping a spill up and living with a permanent mark. Nothing is stain-proof if it is left long enough, but sealed concrete is dramatically easier to keep clean than bare concrete.
Yes, and for patios, porches and pool decks it is often the better-looking choice. Stain colours the concrete and lets its texture read through, where an opaque coating covers it. We will talk through which suits the slab you have.
Old slabs are most of this work. What matters is whether the concrete is sound and whether moisture is coming up through it, not how old it is. We check both before quoting, because a slab with a moisture problem will lift a coating regardless of what goes on top.
Related services
Siding, stucco, brick and trim while we are already on site.
Learn moreWarehouse and shop floors, offices, retail and multi-unit properties.
Learn moreTell us about your project. We will walk it with you and put a number in writing, with no pressure and no obligation.